Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

project material


lboy1971

Recommended Posts

Picked up a B10 with a homemade dozer blade hitch using a 46 inch Gilson blade. I took the hitch off. It goes under the full length of the tractor and attaches at the rear mounts on the drawbar for the tiller. The guy also has tube frame welded to the front axle with a lift in the middle. Trying to figure out what I can make out of this. [img]http://www.simpletractors.com/club2/attach/lboy1971/frame1.JPG[/img] Maybe some kind of rear lift. Maybe a crane with cable winch or set of forks with some kind of lift. Have to figure out what I have laying around. [img]http://www.simpletractors.com/club2/attach/lboy1971/frame2.JPG[/img] [img]http://www.simpletractors.com/club2/attach/lboy1971/frame3.JPG[/img]
Link to comment
Share on other sites

quote:
Originally posted by lboy1971
Might take me a week or 4 years, cause that's the type of guy I am :)
Boy can I relate to that!:D Elon
Link to comment
Share on other sites

quote:
Originally posted by lndscpr
well i could use that as a roll bar. I have that on my list if things i will never get to.....
I have a list like that. It doesn't start out like that, though. Mine started as a list of things I'd like to do.
Link to comment
Share on other sites

quote:
I have a list like that. It doesn't start out like that, though. Mine started as a list of things I'd like to do.
At least you get to make your own list...my wife makes my list!
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...