Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
jrmorrill

Stock belt lengths on Landlord 2010?

Recommended Posts

jrmorrill
Hello all, I tried searching on the site for information about belt lengths but I haven't been successful. I'm looking for the proper length of belts for the: mower deck to center PTO pulley drive pulley (from engine to center PTO on the side of tractor) The belts I have work OK but I believe they're not quite right. I'm always having to make compromises with adjustments. Rather than continuing to purchase different length belts I thought somebody here could give me a firm answer. Thanks! Jason

Share this post


Link to post
Share on other sites
gregc
Drive belt part #154273 = 42.3" HB belt Generator belt #1607323 = 37.5" belt PTO belt #121078 = 35.1" HA belt Mower cross drive belt #174911 = 44.1" HA belt Mower arbor drive belt #1719819 =82.1" HA belt

Share this post


Link to post
Share on other sites
msiebern
Here is a link to a great belt guide located here on the Simple Tractors site. http://www.simpletractors.com/parts/belts/belts.htm You can also download the manuals on this page near the top right side of the page where it says "Search for Manuals at Simplicity Mfg." Enter the mfg number 990395 and you can download the manual for your tractor. http://www.simpletractors.com/club2/portal_content.asp

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×