Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  
firefoxz1

Cracked deck repair - part II

Recommended Posts

firefoxz1
Well I said I had another 36" Broadmoor deck to redo. This one is off the 728. I thought this one was only cracked but ended up just about as bad as the 738's I just did (see "deck on crack"). I got a little carried away with the welder because there was extra holes drilled in the deck and as I was welding the cracks and the extra holes shut I decided to weld away and drill completely new holes in the deck so now I have no holes. [IMG]http://img.photobucket.com/albums/v233/kismar/SimpClubPics/728deck002.jpg[/IMG] [IMG]http://img.photobucket.com/albums/v233/kismar/SimpClubPics/728deck003.jpg[/IMG] [IMG]http://img.photobucket.com/albums/v233/kismar/SimpClubPics/728deck004.jpg[/IMG] [IMG]http://img.photobucket.com/albums/v233/kismar/SimpClubPics/728deck005.jpg[/IMG] [IMG]http://img.photobucket.com/albums/v233/kismar/SimpClubPics/728deck006.jpg[/IMG] I noticed after doing 3 of these decks now that the right outside arbor shelf doesn't seem to crack, or atleast on my three decks they where OK. Do you suppose it's because that's the stiffest part of the deck because it's surounded by three sides. What I need now is a tank big enough to dunk this for electrolysis.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×