Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sickle Bar and B -112


portuncia

Recommended Posts

I just aquired a sickle mower for my B-112 and it seems to all be there. It is a cable lift as shown in the attachments manual, however I cannot find any pictures and diagrams of how the belts run to the PTO. The mower came with a B-110 in parts and in one of the boxes is a very large pulley/sheave. Would this large sheave be mounted on the PTO shaft to run the Sickle? I assume there are two belts for this, one from PTO to one of two stacked sheaves on the sickle bar and the other from the other sheave to the main drive sheave. Anyone know what size the sheave for the PTO should be and the sizes of the belts? As always your help is very much appreciated. Jeff
Link to comment
Share on other sites

46" Sickle Bar Drive Belt# 1700059 Length 64.1" Type HA There are 2 pullies on the pto the sickle belt goes on the smaller pulley as per the diagram.

Link to comment
Share on other sites

how does this belt 1700059 correspond to the numbers I am seeing in the Attachments manual 101136 and 2027145?
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...