Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  

Sickle Bar and B -112

Recommended Posts

I just aquired a sickle mower for my B-112 and it seems to all be there. It is a cable lift as shown in the attachments manual, however I cannot find any pictures and diagrams of how the belts run to the PTO. The mower came with a B-110 in parts and in one of the boxes is a very large pulley/sheave. Would this large sheave be mounted on the PTO shaft to run the Sickle? I assume there are two belts for this, one from PTO to one of two stacked sheaves on the sickle bar and the other from the other sheave to the main drive sheave. Anyone know what size the sheave for the PTO should be and the sizes of the belts? As always your help is very much appreciated. Jeff

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this