Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
ReedS

Plumbing err Kohler question

Recommended Posts

ReedS
While I'm basically a dedicated briggs fan I managed to put my fingers on a very well priced K321 supposedly of 14 hp. Currently mounted on a homemade leaf blower it has a magneto ignition but no under flywheel charging system. The question that comes here is whether this can be converted to the battery powered coil and an under the flwheel alternator? I haven't really worked on the kohler motors enough to know if this will work so anything that is know about this would be apppreciated. Thanks

Share this post


Link to post
Share on other sites
SmilinSam
Might be cost prohibitive. The flywheel you need will have to be a Magnum series with the underneath magnets as well as the outer magnet for the ignition coil. Also as already stated , you will need a bearing plate that allows the installation of a stator if yours does not already have the threaded holes and the mounting ring cast into it.

Share this post


Link to post
Share on other sites
SmilinSam
quote:
Originally posted by ReedS
Sam, the plan is to ditch the mag for a battery powered coil ig nition. Really only need the alt and external ring gear for starter. Doesn't sound to bad to convert.
Guess I need to learn to read better:D I have a bearing plate, flywheel, and stator from a K301A block if that would work.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×