Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  
FastPaul

B-10 oil breather ?

Recommended Posts

FastPaul
My B-10 is blowing oil out of the breather tube? I ran it about 45 min. yesterday to try it out, I just put a brand new piston and rings in it ,There was enough oil that it was wet on the top of the front axle .I took it apart this morning and took the breather apart ,seems to be fine .Any Ideas Thanks I was thinking about extending the hose to the carb like on the newer tractors,But it slill should'nt be blowing that much oil My B-1 and 101 have the same set up and they don't breath any oil at all??

Share this post


Link to post
Share on other sites
FastPaul
Yes I think it was I puumbed the breather into the carb and took two passes on the lawn decided to stop until the grass dried out but when I got off it was blowing oil out the front seal .Way to much crank case preasure ??? I have a 10 HP i'm gona get running in a parts tractor I have ,If it runs good I'll do a swap untill I can figure this problem out.
quote:
Originally posted by Bunky
Was it blowing oil Before you changed the rings???

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×