Roving Nossle 990447 - anyone got pictures?

[Guest]

Does anyone have any actual pictures of the handle and/or the front of the hose for the roving nossle? The handle looks simple, though not sure how the front of the hose needs to be made so I don't wear out bear hose... Anyone have Ideas? Pictures?

The roving nossle assembly handle looks like below:

[wilm169 1]

I turned mine around and put the small end on the vac, that way you don't mess up the fancy end. Put the handle in between the clamp ends.

[ehertzfeld 3]

Later today I can go out and take a picture of my nozzle. I don't have the carrier though.

[Guest]

Elon- Thanks: I'm interested in a picture of the end of the hose in this picture. Handle I think I can figure out, but interested in that too (less important). i.e. what is the end end made of? plastic or metal...

quote:

---

Originally posted by ehertzfeld
Later today I can go out and take a picture of my nozzle. I don't have the carrier though.

---

[ehertzfeld 3]

quote:

---

Originally posted by michaelg221
Elon- Thanks: I'm interested in a picture of the end of the hose in this picture. Handle I think I can figure out, but interested in that too (less important). i.e. what is the end end made of? plastic or metal... [img]/club2/attach/michaelg221/RVN_447_5.jpg[/img]

quote:

---

Originally posted by ehertzfeld
Later today I can go out and take a picture of my nozzle. I don't have the carrier though.

---

---

I my handle is made out of metal. But I'm sure over the years they switched to plastic. Once the storms head east of here, I'll go snap one or two for ya.

[wilm169 1]

The one I just got from a dealer [NOS] has metal clamps and handle and the end of the hose is formed rubber[plastic] made right on the end.

[ehertzfeld 3]

Sorry but by the time I got home is was too dark to go out in the non lighted tent. After I get home from the swap meet, I'll take the pic.

[ehertzfeld 3]

Sorry it took so long, here is my nozzle

Hope this helps.

[Guest]

Elon, thanks- Is that end made of metal? It definitely gave me some ideas. Two layers of either metal or rubber, rivit through the end of the hose. By overlapping, the squeezing of the two materials will prevent/reduce ripping the hose.

[FastPaul 0]

Elon Nice Nozzle!! 8)[:0]

[ehertzfeld 3]

quote:

---

Originally posted by FastPaul
Elon Nice Nozzle!! 8)[:0]

---

Hey now, no need to get personal!:D

[ehertzfeld 3]

quote:

---

Originally posted by michaelg221
Elon, thanks- Is that end made of metal? It definitely gave me some ideas. Two layers of either metal or rubber, rivit through the end of the hose. By overlapping, the squeezing of the two materials will prevent/reduce ripping the hose.

---

It rubber