My 610Lt and Cab

[MarksA-C 93]

Hello everyone here at SimpletrACtors. I have to apologize for being such a pain for the past few months with all the little things I had wrong with my tractor. I have finally fixed all the problems with my tractor and most on the cab and I want to show you all what I have done with all the help and Info you guys have given me. And you all have been asking for pics, so here they are!!! What do you think??? [IMG]http://i107.photobucket.com/albums/m290/mccarronm04/Mytractor.jpg[/IMG] [IMG]http://i107.photobucket.com/albums/m290/mccarronm04/Mytractor2.jpg[/IMG] [IMG]http://i107.photobucket.com/albums/m290/mccarronm04/MyTractor3.jpg[/IMG] I know the cabs a mut, but If it works it works. And this is my home collection... [IMG]http://i107.photobucket.com/albums/m290/mccarronm04/Mytractor4.jpg[/IMG] Pictures taken by Simpletom (Tom). Thank You Tom!

[dirtsaver 1]

Mark I think that's the first small frame tractor I've seem with a cab. Looks like you've done a good job adapting the Bolens cab. As time goes by I'm sure you'll make more improvements to the setup.

[skot71 0]

That looks good! But I'm sure it will WORK good, and that's what matters. Good job.

[Roy 0]

Outstanding job on making the cab serviceable and looking good. Congratulations. ^

[goatfarmer 817]

Nice job!

[ehertzfeld 1]

I must say Mark, it looks pretty good. Luckily for you shipping prices are too high:( Your welcome:D

[johnmonkey 4]

Great work. JH

[shanhamm 0]

the cab looks nice mark. how did you end up attaching it? self drilling screws?

[MarksA-C 93]

No, not at all. I actually made a set up that had studs in my hood and fenders so all I heed to do is bolt it down with 1 locknut on each corner. I drilled the hole and fed the bolt up through the hole. I added a locknut and a standard nut and tightened it. the I just put the cab mounts onto these "studs" and added the washer and nylon lock-nut. Works really nicely and its easy to take on and off.

[MPH 12]

Looks like it'll keep the snow off of you too me, that's what matters the most with a blower on the front. Don't look half bad either. Nice retrofit.

[MarksA-C 93]

Here is the bolt pattern I was talking about. [IMG]http://i107.photobucket.com/albums/m290/mccarronm04/BoltPattern.jpg[/IMG]

[Scott Salmons 7]

Nice Job Mark!

[MN_FISH 0]

You'll be really proud of it when you put it to work and you are nice and comfy ^inside. One thing left to do is get some white duct tape to put over the Bolens:D;)

[MarksA-C 93]

quote:

---

Stated by-MN Fish One thing left to do is get some white duct tape to put over the Bolens;):D

---

Why should I do that? I like it the way it is, it works and thats the bast part. I have to be careful not to take any hills wrong because my pivot point is in the middle and the cab is mounted to the front and the back.

[SimpleTom 4]

Mark, You're welcome for the pictures. It was nice meeting you and your brother and seeing your collection. I wish I could have stayed longer but with the cold weather and the cold that I currently have I probably shouldn't have been out as long as I was. Next time you come over to my place and check out my heard of Broadmoors. Tom

[MarksA-C 93]

I will defonitly have to do that.

[john2oak 0]

Hello Mr Mark, could be very useful here in our winters. Good idea. Still have the hood, i just need the rest of the tractor !!! Nice work Salutations

[AC808 0]

Looks great Mark!

[MarksA-C 93]

Thank You, But it wouldn't be like this without all the help I got from Everyone here and my dad (He fixes what I break)

[wminmi 0]

quote:

---

Originally posted by MN_FISH
One thing left to do is get some white duct tape to put over the Bolens:D;)

---

Bolens' tractors ain't that bad....better than the "Crapsman" tractors i have had :D

[MarksA-C 93]

Just got around to this.

quote:

---

dirtsaver Mark I think that's the first small frame tractor I've seem with a cab.

---

WRONG. The first I can remember is Shanhamm. look here... [url]http://simpletractors.com/Club34/topic.asp?TOPIC_ID=70645[/url]

[jjouelle 0]

In my book, function beats appearence every time. The one detail I noticed (I'm surprised nobody said anything about it) was the little American flag in the upper corner of the cab. That made the whole thing perfect for me, enjoy ^

[MarksA-C 93]

Finnaly, your the first to notice the flag. I still need to patch it up then I'm ready to go! Well, and get my set of rear rims fixed and get the chains on and wait for Wminmi to come to WI. Can't wait for it to be finished! Thank You All!

[Rookie725 0]

Great Job, Enjoy the snow! Deidra^

[ike 0]

Good job,Looks like your ready to go!