New Toy

[lboy1971 0]

Thanks to a tip from a fellow club member I ended up buying this B10-loader. It's a bit rusty and missing the mounting brackets and hydraulic pump but isn't bent up outside of the bucket. The control moves freely but the either the cylinders or joints are tight. Was sitting outside in the grass for probably years.

[johnmonkey 4]

cool, looks like alot of work, but a little effort and determination I'm sure you'll get er done. JH

[MPH 12]

Looks like a good winter project. What is that strange looking yellow tractor? And what's that big aglug tire mounted too?

[eagle5473 0]

Looks like an Allis G rear engine cultivator tracftor to me in grey paint

[PeppyDan 3]

The "strange yellow tractor" looks to be a Miniapolis Moline & I agree about the other one looking like a A.C. "G" in primer. Dan

[lboy1971 0]

Yellow lawn tractor is a MM 112 with a Honda 7HP engine. I have a running Kohler 12HP that I took out of a parts Ford 120(basically same tractor) a few years ago that'll bolt right in the MM. It has a nice pair of 6-12 ags. The grey tractor is a 1949 Allis G with hydraulics. I do have a complete hood and air cleaner for the G, just haven't gotten around to putting them on. The other pair of ag tires are 23-8.50x12s with fluid that I took off a Jacobsen Chief that I parted out. But back to the loader, I was suprised at how light it is. I have a 101 I can put it on or even a couple 725's.

[Guest]

Lloyd, that's an L10 1st Type. Nice find. You'll need the 1.5" spacers and a set of L Brackets welded to a plate.

[comet66 0]

Looks like a nice start to a winter project. Good score.