GWGAllisfan Posted December 22, 2006 Share Posted December 22, 2006 I brought the old 990314 landlord into the garage the other night, in anticipation of some dissasembly, cleaning and painting. Last night I was trying to get an idea of the condiotion and issues to think ahead on, when I noticed the axle tube seems to be able to move from side to side about 1/4 inch. I thought it might be a bad bushing?, so raising the rear off the ground and lifting each wheel, I confirmed there wasn't any up and down movement relative to the transmission. There is heavy oil/grease leakage in that area, but nothing else. Any idea how serious this could be? With my primitive repair area, I want to stay out of the transmission if I can. I will try to take pictures if i can get any to show anything clearly. Link to comment Share on other sites More sharing options...
richp Posted December 22, 2006 Share Posted December 22, 2006 I think if you just loosen the coller on the left side, and push the differential side over to the left, you can take up the gap. It's been a while, but i think it is a common fix. Link to comment Share on other sites More sharing options...
HubbardRA Posted December 22, 2006 Share Posted December 22, 2006 Randy, Do what Rich said. That's it. Link to comment Share on other sites More sharing options...
Recommended Posts