Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
lboy1971

need help with 5000W altenator/generato

Recommended Posts

lboy1971
I picked up a Wheel Horse 5000W altenator or generator (which is correct?) It's made by generac and looks very similar to the simplicity/allis units and the Sears units I've seen for mounting on tractors. Does anyone have info or repair manuals or links to them? It was working but now it doesn't.

Share this post


Link to post
Share on other sites
Mack
http://www.simplicitytechpubs.com/6767PRINT/PDF_files/TP_100_1242_00_AT_S.pdf

Share this post


Link to post
Share on other sites
UCD
That manual is for the 1500 watt Generator MFG# 990220 The 5000 watt alternator MFG# 1690558 is in the Sovereign, GTHL, 900 series attachments and accessories manual and does not contain any Alternator parts list. Order repair parts for alternator from: GENERAC P.O. BOX 8 Waukesha, WI 53187-9987 Phone 414-544-4611 Refer to generator I.D. number on alternator.

Share this post


Link to post
Share on other sites
gregc
Maynard, the last four digits of the phone number are 4811.

Share this post


Link to post
Share on other sites
UCD
I just copied and pasted from the manual

Share this post


Link to post
Share on other sites
Simpleton7016
Lloyd, I have a very good friend who works out of that plant in Waukesha. Let me know if you have any problems or if the part/parts you need are overly expensive.

Share this post


Link to post
Share on other sites
D-17_Dave
Try plugging in an electric drill, crank the unit and pull the drill on while spinning the chuck by hand. Sometimes this will re-energise (or flash) the exiter bourd and restore the output. IF this works let it run for a few minuets and shut it off. Then recrank the unit and see if you again have power. This may help to diagnose the problem.

Share this post


Link to post
Share on other sites
lboy1971
Thanks for the help and info. The one I picked up looks just like the Allis unit posted by UCD. A previous owner removed all the tractor mounting hardware and bolted it to a small homemade 2 wheel trailer and mounted a 9 or 10HP wisconsin engine from a tube frame Bolens to power it. Even built a small dash board and battery box for the engine. The wisconsin engine runs very well at least, lol.

Share this post


Link to post
Share on other sites
lboy1971
I tried both of those numbers and they were both disconnected. The model number on the 5000 Watt alternator is 97 50GN-01. Here's a picture of what it looks like. [img]http://www.simpletractors.com/club2/attach/lboy1971/MVC-010S.JPG[/img]

Share this post


Link to post
Share on other sites
BLT
Lloyd, how fast does that Wisconsin run in RPM?

Share this post


Link to post
Share on other sites
gregc
Lloyd, try this number: 1-888-GENERAC http://www.generac.com/industrial/contactus.asp

Share this post


Link to post
Share on other sites
UCD
1-888-436-3722

Share this post


Link to post
Share on other sites
lboy1971
Not sure of the rpms offhand on the Wisconsin. I would guess similar to a briggs or tecumseh. It looks like it was taken out of a Bolens tractor to me.

Share this post


Link to post
Share on other sites
BLT
Briggs and Stratton bought the pressure washer and small generator end from Generac a few years ago. Sears was Generac's largest customer in the small KW line at one time. Briggs has some wiring diagrams that can be downloaded and over the years that has changed very little.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×