bigkenroberts Posted January 4, 2007 Share Posted January 4, 2007 Someone send me an e-mail address and I will attach to a RETURN thru yahoo. I have tried 4-5 times and cannot upload the picture to this forum. Get 'this page cannot be displayed" after the upload finishes ??? TIMEOUT value ??? It's on a 7116 just down the street. [img]/club2/attach/HubbardRA/Pic1.jpg[/img] Link to comment Share on other sites More sharing options...
HubbardRA Posted January 4, 2007 Share Posted January 4, 2007 Ken, I sent you a PM. Link to comment Share on other sites More sharing options...
bigkenroberts Posted January 4, 2007 Author Share Posted January 4, 2007 For some reason I can't read my PM. But, the picture file is 597x423 and 108KB. I'll try and put it here - but - the upload script says -pause- "file too large to upload". If I make it any smaller, it will be very hard to see. OK - i'll try with it smaller than 100KB - 522x396 91.9KB. -pause- Now I get "save failed". This is tuff. Gimmie a e-mail address and I attach it to a yahoo RETURN. Please respond here. Something is wrong with my PM area. Link to comment Share on other sites More sharing options...
Kent Posted January 4, 2007 Share Posted January 4, 2007 Bigkenroberts -- I think you may have ventured into the "testing" section of the site, and not the "live site." Try going to Simple trACtors using one of the menu options above, then enter the Clubhouse from the links there on the top of every page... Size limits for pictures are 100kb, but it sounds like your latest error is because you're in the testing site and not the live site -- especially since you can't access your PMs either. Link to comment Share on other sites More sharing options...
bigkenroberts Posted January 4, 2007 Author Share Posted January 4, 2007 That got it fixed - but I will still send the picture to ROD because he may want to display the bigger images. Thanx for the heads up !!! Link to comment Share on other sites More sharing options...
HubbardRA Posted January 11, 2007 Share Posted January 11, 2007 Ken, I put one of the pictures in your post. I think it is plain to see that is the factory hitch for a later model RBT. Link to comment Share on other sites More sharing options...
Roy Posted January 11, 2007 Share Posted January 11, 2007 The factory hitch HubbardRA referenced is a "sleeve hitch". Just a clarification Rod. :D Link to comment Share on other sites More sharing options...
gregc Posted January 12, 2007 Share Posted January 12, 2007 Simplicity calls the sleeve hitch a One Point Hitch. Just another clarification. ;):D Link to comment Share on other sites More sharing options...
SmilinSam Posted January 12, 2007 Share Posted January 12, 2007 Its also known as a Brinly hitch for Brinly type plows, discs, cultivators, rear blades, planters and such. Link to comment Share on other sites More sharing options...
Recommended Posts