RayS Posted February 24, 2007 Share Posted February 24, 2007 Anybody able to tell by the framimg of this cab what it may fit. The guy that I got it from told me that he wasn`t sure what Simplicity that it went on. That he got it with a tractor that had a bad engine and he got rid of the tractor and kept the cab. He had thought that it was a 5600 something but wasn`t sure. It would take alot of modifying to fit my 917H. I figured that I would try and see if it looked familular to any one that may have one like it so that I could get the correct MFG. number for it. It is way to nice of a cab to modify and would like to find it a new home if i can identify it. I may end up making a few brackets and make it fit. Been looking for a cab for quite some time. :D Link to comment Share on other sites More sharing options...
plastikosmd Posted February 24, 2007 Share Posted February 24, 2007 looks exactly like my sears/craftsman one...same mounting in back...same clasps for door...all exact the same..only difference is the front vent for the tractor.. i altered mine in the front/rear to mount to my b12 Link to comment Share on other sites More sharing options...
msiebern Posted February 24, 2007 Share Posted February 24, 2007 As far as the frame goes, that looks identical to the one I bought this spring except it has Deutz printed on it and is tan in color. I see now that I am missing the cross support for mounting at the rear of the cab. The guy I bought it from got it at an auction and didn't know what it fit, but I couldn't pass up the price. It was not meant for the 7xxx series with manual lift! I was going to try to adapt it to my AC-B112 with hydraulic lift on it. Any chance of getting a couple of detail shots of that rear lower cross brace? Thanks.. Link to comment Share on other sites More sharing options...
RayS Posted February 24, 2007 Author Share Posted February 24, 2007 Mike, I will get a picture with dimensions for you tommorrow or later this evening. Link to comment Share on other sites More sharing options...
Rob-B Posted February 24, 2007 Share Posted February 24, 2007 It also looks very simular to the one I put on my buddies 5216 special. Rob Link to comment Share on other sites More sharing options...
RayS Posted February 24, 2007 Author Share Posted February 24, 2007 Mike here`s a picture with some dimensions. If you need any others let me know. Here`s a couple pictures of where I believe I will end up mounting it without having to do any modification to the cab frame. I have also been told by another club member that it is a cab for the 4000, 5000 and 6000 series small frame tractors. Link to comment Share on other sites More sharing options...
msiebern Posted February 24, 2007 Share Posted February 24, 2007 Thanks for the dimensioned picture. That helps explain a lot. It would also mean that the Deutz I have would have been for the T800 series. Might have to check it on my Broadmoor 728 to see how close it comes vs the AC B112. Thanks again. Link to comment Share on other sites More sharing options...
Recommended Posts