212 covers

[Glacier 0]

Has anyone ever cut a left side cover to go back on after they added a hydro lift? If so does anyone have a picture of the cover? Would like to cut mine, but I don't have the courage to, would take a chance if I had a backup cover. Or maybe a picture would get me out there to "git er done"

[D-17_Dave 12]

The flat hooded 100 and 200 series had a shortened cut down side shield for the hydro lift. You should be able to find one but it's a straight cut right under the offset roll if you should want to trim yours.

[ehertzfeld 3]

This is my 3012 before I installed the hydro lift

This is Ugly Betty "B10" that I cut to fit.

[RayS 80]

[Glacier 0]

Thanks for the pictures guys. I cut the full size cover to fit around the hydro lift and it uses all the mounting bolts, and also to cut out for the plug/breather. I'll try to get a picture later today.

[Killer_A-C 0]

I have a few originals if you need one.

[MikeES 467]

I cut the side cover about the size of the hydraulic quandant. Notice my spring return for a failed internal spring.