jgehman 0 Posted March 9, 2007 Anybody ever see a B1 with factory mounted headlights? I can't find any pictures of one. Share this post Link to post Share on other sites
MPH 12 Posted March 10, 2007 Not quite a B-1 but when I got my 725 it had these on it, which I have learned since are the same as B-1 headlights. Zoomed in 3 times so got a little fuzzy. Wires run through a hollow bolt that the hood pivots on. Share this post Link to post Share on other sites
ehertzfeld 1 Posted March 10, 2007 I don't believe they ever offered lights for the B1. I'm going to do the same as Marty did for my B1. Share this post Link to post Share on other sites
RayS 79 Posted March 10, 2007 http://simpletractors.com/simplicity/new_in_1963/model_725.htm I know that this is a Simplicity but I have seen one B 1 with this same headlight and one with the holes in the front and center of the hood just like in the picture above. Share this post Link to post Share on other sites
UCD 14 Posted March 10, 2007 The head lights mounted using a hollow through bolt where the hood hinged/pivoted. Share this post Link to post Share on other sites
Killer_A-C 0 Posted March 10, 2007 The only headlights I have seen on a B1 is on an A-C promo film I have. I think they were all chrome. I would like to have one of those hollow bolts to make repros with,Matt Share this post Link to post Share on other sites
MPH 12 Posted March 10, 2007 Go to a hobbie shop type store Matt, when I used that method to hinge the hood on the landlord that is where I found the bolts for it. Share this post Link to post Share on other sites
jgehman 0 Posted March 10, 2007 Thanks for the good ideas.I might see if I can drill a stright hole though a bolt.If not, Try Martins idea. I like all the good info on this site.:D Share this post Link to post Share on other sites