Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

B&S Carburetors


tej

Recommended Posts

Just a warning to anyone disassembling a B&S carb on a 10, 12, or 14 cast-iron engine without the aid of a manual. The top has 4 screws attaching it to the body. Before you take the screws out and try to separate the two parts you must remove the needle valve on the lower front of the carb and then the tube that it fits in. This tube runs from the body up into the top and will be damaged if you attempt to force the top off. Tim
Link to comment
Share on other sites

Hi Tim, Thanks for posting your message as I was later today going to go through my carb. Infact I was gathering my tools. Thanks again for the warning and I now know what to check for. Your friend Jackl
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...