Stack pulley

[bud119195 119]

Does anyone have a 5000 or 6000 series simplicity? Ineed to know the lenghth and pulley diameters of the stack pulley on bottom of motor.Acording to my parts book the 8-18 hp briggs all used the same pulley.I am putting a 18 hp briggs in mine and all I have to do is get a pulley yet.Thanks

[AllisPhreak 0]

I have a simplicity 5116, I'll get a measurement for you and post it this afternoon (I am at work). If you are looking for a pully for a 5000 series machine, you might want to inquire with Mark A-C. He is parting out a simplicity 5116, and he may still have that part

[MarksA-C 93]

Hey. I did part out the 5116, but I needed the pulleys for my 6516 (6518) with the newer 18hp repower. Sorry...sm02

[bud119195 119]

What size is your pulleys?

[AllisPhreak 0]

Todd - These are the best measurements I could get, as I do not have calipers to make super accurate measurements.... Overall length of shaft to bottom of bottom pulley : 7 1/4 " Large pulley diameter (Bottom pulley) : 4 3/4" Small pulley diameter (top pulley): 2 1/4" (Best estimate, as I do not have calipers, and shaft prevented me from getting a total accurate measurement) Distance between pulleys (from bottom of top pulley to top of bottom pulley) : 4 3/4" Hope this helps - Karl

[bud119195 119]

Thanks