What Briggs Coil for B10

[callwill 1]

Posted here for a B&S Coil for my B10; no response. There are some on ebay, ijust dont know what Briggs part number to look for. Can someone answer that question for me?

[ehertzfeld 1]

What model number?

[Morris 0]

yeah, what Elon said...what numbers are on the engine ID plate? Only way to tell is by the numbers... Can't assume all B-10's came with the exact same engine, and all too often, the engines have been upgraded with slightly different models over the years, as is the case with my B-1. So, get us the #'s and someone will know the answer... I have a Broadmoor I just got last week that has a Tecumseh in it, but I'd swear that isn't the original engine....

[RayS 80]

If the motor is a 243431 and uses a starter generator. This would be what came from the factory. You need Briggs number 298968 for the armature or coil. Here are a few in this link. [url]http://home.search-desc.ebay.com/briggs-298968_Outdoor-Power-Equipment_W0QQcatrefZC6QQcoactionZcompareQQcoentrypageZsearchQQcopagenumZ1QQfclZ3QQfgtpZQQfposZ49099QQfromZR2QQfsooZ2QQfsopZ2QQftrtZ1QQftrvZ1QQftsZ2QQlopgZQQsacatZ29518QQsadisZ200QQsaprchiZQQsaprcloZQQsargnZQ2d1QQsaslcZ2QQsbrftogZ1QQsofocusZbs[/url]

[callwill 1]

It is a mid 1960's B10 with a starter generator. It is not here & i won't be laying eyes on it for 3 or 4 weeks. I will look through some of the paperwork i have that came with it...was hoping this was easy & i would have the coil for it to get it back together next time.

[RayS 80]

You need the coil in the link above.

[callwill 1]

Thanks. It looks a bit different than the one i took out of it so i wasn't sure when i was looking thru the ebay listings.

[RayS 80]

I got the part number from a B & S parts manual. if it is a 243431 that is original to the tractor that is what you need.

[Learning 6]

For what is worth, if you have a Briggs model 23D, the coil part # is 296834. It has "three legs" and is square on top. Not to many around.

[Chris727 2,136]

The early B-10 (1964) has the 23D as the stock engine so to be sure find out the numbers first. I would say that if you think it looks different it might be the 3 leg coil used on the 23D as Learning had suggested. If you need a 3 leg it will be pricey, B&S wants $90 for a new one last time I checked, I found one for about $26 on ebay for my B-10.

[ehertzfeld 1]

This is from Napa's web stie. http://www.napaonline.com/MasterPages/NOLMaster.aspx?PageId=470&LineCode=SME&PartNumber=701605&Description=Ignition+Coil+-+Power+Equipment