I apologize I was wrong

[Mean_LiL_Allis]

I think I jumped the gun,as you can see I restore and own Allis Chalmers but I had J.D. lawn and garden tractors.You talk about getting a ribbing I sold my last J.D.a 140 H3 and bought this B112.As you can see it needs help and two weeks after I bought it I messed up my right sholder at work.Now on April 23 I get operated on and I will not have use of it till August,as you guys can see I am under a little STRESS .What I want to do with the 112 is puller and home use(small cart or snow blower)LOL.I would like to be able to work on it a little after the operation and just trying to get it ready for that day.I do see your site will be a help and I am going to give it another chance.Once again I was wrong and I apologizedz

[plastikosmd]

didnt hurt my feelins...but it takes a man to apologize (just get married to find out) scott

[tractormike]

Sorry to hear about your shoulder. Hope everything comes out well for you and you heal up fast. No need to apologize, just jump in and be a part of the group. As far as your tractor goes I have a B-110 that I brought back to life a while ago. I modified it a bit. I put on 26x12x12 rear ag tires on it but had to raise the seat pan 1 1/2 inches to clear the tires. Good luck with your tractor and your surgery.

[MDB]

Barrie, I am glad that you have decided to stay around:D Looks too me like you have a pretty solid B112 there, it should make for a great restoration project. Hope that you get along good with your shoulder surgery and the recovery. Mike

[ehertzfeld]

No need to apologize. We all have different views and take things differently from others. Just keep coming on, ask questions, comment on others, and try to answer some when you can. I am positive by the end of the week, all will be forgotten. I'm very glad you are going to stick around.

[FastPaul]

It's about time you came to your senses Barrie LOL ( Just kidding) I'll have to say this is the best site with a great group of people. WE all can relate to your stress one time or another Welcome to the club and just remember were all real people here ,no different than you .As for you tractor, It's the same model that got me here too .A great machine It's one of my best tractors

[Marty-MN]

Glad your staying, I understand about shoulders. I bought this 620 as a project for the winter of 05 then fell on the ice and did the left shoulder big time (22mm hole in cuff and bicep ruptured). I had to build up the strength as much as possible before they did surgery. so December till end of march building strength, April and may and part of June in sling and finley full use of left shoulder in mid September. so much for 06 then on to right shoulder it was worn out and worse than left. had surgery March 2 and should be out of sling by mid may and hope to be using it normally by end of August. the 620 is still waiting, glad I have the 616 and other 620. sorry for the long post but I feel so lucky to have done so well.
[img]/club2/attach/Marty-MN/620 loaded2.jpg[/img]

[B-16_IC]

I agree with Scott, it takes a big man to apologize. I know because I am happily married!:) Sounds like you are making a good move getting rid of the green stuff{}. I am surrounded by them around this area, so it is good to come on here!^

[tracktor312]

Hey mean lil allis I just recently had the exact opposite problem I (dont look anyone ) own a few j.d. tractors I went on a site and asked a question the answer I got was go buy a manual. 4 days 1 reply.here I always get the help I need. I have seen some answers like Q. Whats this fit? A. a tractor. but it is all in fun people actualy have some fun. but you will get good advice. the j.d. people are differant.

[BLT]

Under the circumstances, if you know the tractor runs, I would want to gather up items to convert vari-drive to straight three speed. I don't know if A-C had a six speed (Hi-Lo belts)available. You can put in a classified on this website and gather technical know how also. Then the rest will have to wait. I wish you well after your surgery.

[Willy]

Hang in there Barrie we're all behind you. Good luck with your shoulder. My doctor told me he needed to jack my butt up and slide a new body under me.

[Roy]

Barrie/Marty, Having gone through three (1 RH & 2 LH) shoulder surgeries, you have my sympathy. It ain't fun. :( Good luck,

[HubbardRA]

Good luck on your shoulder surgery. Sorry we came off wrong at first. We all get tired and frustrated from time to time and tend to spout off a little. After being the VP and Pres of this site, I know how frustrating it can be. I have been with this site since shortly after Kent started it. Like myself, most of us hang around to help others. Even though some of us are called experts, we still learn new things quite frequently. I have a folder of printed pages from this site. It is currently about 4 inches thick. Anything I see that could help me later gets printed and put into that folder. You know, when we get eligible to apply for AARP, we have the right to be grouchy once-in-a-while.:D

[toad270]

Good Luck with the shoulder. Its already forgotten. This is the BEST site for these tractors

[goatfarmer]

Everyone has bad days.:O As they say in New York, fagggettaboudditt. Good luck with your shoulder.

[PGL]

Hope your shoulder/body can be rehabilitated as well as these old tractors that just seem to keep on going. The problem is it's harder to find good interchangeable body parts or buy a donor machine to keep in reserve.

[Bantam boy]

Glad you wised up I was fixin to kick your butt, instead I'll be over tues. evening to drop off a decal I picked up saturday for ya.}:)sm03sm03

[comet66]

Welcome aboard. As far as the shoulder, like stated above, been there done that. Healed up a lot faster than expected. I'm sure it'll be OK.

[John_RI]

Best of luck with the shoulder. Hope you stick with us! John