Roy 0 Posted May 2, 2007 After cussing changing the RH rear tire for years I finally bought a package of 25, 7/16-20 x 1/2" long cup point Allen set screws to replace the wheel mounting bolts in the traction control hubs on my 700, 725, B-1, and 3212V. Replacing the wheel mounting bolt with set screws makes wheels/tires easier to change. There are two bolts in the R-H traction control hub. I replaced both of them but replacement of only one will make changing tires/wheels much easier. I have an ad in the Parts For Sale forum for the excess set screws. Share this post Link to post Share on other sites
MPH 12 Posted May 3, 2007 Be sure too keep enough of them for your next tractors Roy.^ Share this post Link to post Share on other sites
Chris727 1,851 Posted May 3, 2007 That will make it much easier. Thanks for the tip! Share this post Link to post Share on other sites
HubbardRA 19 Posted May 3, 2007 You need a lot of those set screws with foot draggers. Share this post Link to post Share on other sites
Roy 0 Posted May 3, 2007 Why Rod? Two per tractor will last a lifetime. :D Share this post Link to post Share on other sites
HubbardRA 19 Posted May 3, 2007 But Roy, you may buy more foot draggers to replace those RBTs you have. But then, you will have sold those needed set screws.:O I guess you could put an RBT diff in it. They don't need set screws.666 Share this post Link to post Share on other sites
Killer_A-C 0 Posted May 3, 2007 Roy bring some with you.I will take a few sets,Matt Share this post Link to post Share on other sites
Roy 0 Posted May 3, 2007 Matt, Already in the truck. :) Share this post Link to post Share on other sites