Bent Screw Driver

[SteveP 0]

Can any one provide deteails for the bent screw driver? 1. How long should the bend be? 2. Where are the forks that get stuck (forward, back, below) of the plug? A picture would be great. Thanks

[Kent 436]

There's an article about using it in Resources >> Articles >> Transmissions and Rear-Ends

[KSever 8]

Steve, Here's a picture I took a while back when my AC 314 was stuck. There is a topic associated with this picture along with the other one Kent posted.
[img]http://www.simpletractors.com/club2/attach/KSever/screwdriver.jpg[/img]