Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
john-holcomb

Help 7013S tranny siezing?

Recommended Posts

john-holcomb
Was mowing and every thing was fine, backed the tractor up and shifted the shuttle to foward. The tractro started to move slowed down stopped and the belt started to smoke. Tried reverse again and its fine foward the same thing happened. I took it to the shop and put it on blocks, everything looks fine but even with no load the wheels turn about 4 times and lock up. Any Idea on where to look first? Is it in the shuttle or the tranny? Any thoughts Please. thanks John

Share this post


Link to post
Share on other sites
HubbardRA
John, first thing I would check is to make sure that the reverse brake band is fully releasing. It cannot run forward if that is holding the outside of the planetary unit.

Share this post


Link to post
Share on other sites
john-holcomb
Thanks for the tip Rod, and while the brake band and drum are pretty worn they do work. It looks as if the culprit is the idler pulley on the small belt. It is frozen up solid and has caused the belt to strech and is ruined. JW

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×