Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
MPH

Kids Come Out to Play

Recommended Posts

MPH
Decided the fields were dry enough for some ground engagement time today.:) Started out about 10 this morning robbing 4 more scoops of dirt outta the ole chicken pen, then tilled it into a pass at the edge of the garden


Never got a second front counter wt made this winter so robbed the hitch off a 3 belt blower as it's about 4 inches shorter then a front blade hitch. LL with plow. Oh, after like 4 years now of fighting with hooking the plow to the sleeve hitch the lite came on, put the sleeve hitch on the plow first, THEN pin it to the tractor, piece of cake:)


Time to dirt test them firestones. LOVe 'em


As the plow wanted to float with the 66lb wt hanging out front I had to change to 3 10lb barbell wts. Thanks Tony{my sons}


West field was to mellow of dirt to plow so I tilled it with the 725


plus or minus a few min of one hour straight tilling


LL had double duty, put the disk on it after I got done tilling.


Hit last years dead furrows after tilling, man was that soft.


Last, 4040 with my sorry excuse for a harrow


Called it good at 9pm, fun day

Share this post


Link to post
Share on other sites
ibelee
That looks like some real nice dirt. Love that plate you put on the back of the tiller. Nothin' better for a garden than Chicken compost. I think you could hook up anything to that 4040 and it would look good. One of these days...^

Share this post


Link to post
Share on other sites
Willy
Looks like a lot of fun,amazing how much work you can get out of a small tractor. I haven't tried plowing with mine yet. I have a plow from a sears tractor I'll try to set on my B-10, someday when I get a Chance.

Share this post


Link to post
Share on other sites
toomanytractors
Marty; After seeing your front counter weight I'm reminded that old rollers off a concrete mixer make good weights. I built a rear counter weight for the B-10 for use with the snowblower which made lifting almost effortless. I've also made wheel weights out of them -some fit right into the recess on the wheel and I welded allthread to the outside of the roller to bolt them on. Another thing I've found for making adjustable weights are old brake rotors. Stack 'em, rack'em or whatever!! I also like the idea of using the plow frame to hold a front weight. Good job!! Dave

Share this post


Link to post
Share on other sites
MPH
Dave, word of warning on using a plow/blade frame is the length, they have a notion to dig in esp if using a plow where you have one front tire dropped in a furrow. That's why I used a 3 belt blower hitch this time, beings it's about 4 inches shorter, helped a lot. Thanks for the additional ideas to keep an eye out for to use as wts.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • jbrooks
  • Today's Birthdays

    1. PlayBoy
      PlayBoy
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 8 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×