Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

deck question

Recommended Posts

just bought a b212 lawnmower runs good after looking at deck found it had wrong deck on it had extra deck laying around as well as the correct lift rod and chain. deck i took off has a eye bolt for lifting. after looking at my 914 it looks like the same. deck lifts the same way. did later allis tractors use this deck? it is painted allis yellow

Share this post

Link to post
Share on other sites
The running-board tractors had an eyelet to lift the mower deck -- the cutting height T-handle adjusters were also moved farther out toward the outside of the deck, so they'd clear the running boards. I use one of those later-model decks on my HB-216 -- I simply use a loop of chain that goes around the rear bail, out next to the right height adjuster, and pin it to the normal lift arm. You can't use the eyelet very well that's on the deck, because it's under the belly of the machine -- it bends the short piece of steel that's used as a lift arm, causing it to rub on the tractor's center tunnel...

Share this post

Link to post
Share on other sites
does any one have a picture a picture of the later deck mounted on a allis cant understand why this deck is painted allis color? most later deck that i have looked at on web are simplicity red or duetz allis green

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • BLT
    • SmilinSam
    • lt-scir
  • Today's Birthdays

    1. docs
      (63 years old)
    2. Ronald Hribar
      Ronald Hribar
      (78 years old)
    3. rs07
      (48 years old)
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      · 8 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts