Will old dozer blade fit new Conquest?

[hcalmar 0]

Will a 7016H snow/dozer blade #1690085 work on a conquest with a different hitch assembly? I am thinking of trading in the old man and getting a snapper YT400 series=conquest. Hal

[comet66 0]

Welcome Hal!! I've modified the older hitch to fit my Sunstar, I would think you could do the same with what you have.

[SmilinSam 3,842]

BE careful on advice on mounting old attachments to the new ConQuest. The Blades on the conQuests require the same subframe that the Snow Blower uses. Not a cheap item. The Snowblade hitch hitches to that subframe. Modifying the blade hithc is the least of considerations. One must have that subframe to start with.

[RedbarnRick 3]

Here's the manuals on the two hitches Sam spoke of, I'm not sure if they can still be accessed, I could post them if UCD will explain where on the site to do so and how it's done( when in doubt ask the experts) TP_100_2122_02_AT_SMA Blade and hitch Landlord TP_100_2231_01_AT_SMA Snowthrower and hitch

[4xbill 2]

Try these... they might work:Q. You can right click on them and "save as" to your computer. [url]http://www.simplicitytechpubs.com/6767PRINT/PDF_files/TP_100_2122_02_AT_SMA.pdf [/url] [url]http://www.simplicitytechpubs.com/6767PRINT/PDF_files/TP_100_2231_01_AT_SMA.pdf [/url]

[hcalmar 0]

Thank you very much for the assistence Hal