Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
perry

projects & parts...misc tractor pics

Recommended Posts

perry
heres some pics of a few tractors around my place. 3 wheel horse's in the shed [IMG]http://i97.photobucket.com/albums/l226/perry71/WH800017.jpg[/IMG] mustang/mowett [IMG]http://i97.photobucket.com/albums/l226/perry71/WH800018.jpg[/IMG] early 60's wheel horse [IMG]http://i97.photobucket.com/albums/l226/perry71/WH800019.jpg[/IMG] 604 wheel horse. i have all parts to put back together. [IMG]http://i97.photobucket.com/albums/l226/perry71/WH800020.jpg[/IMG] broadmoor, landlord, wheel horse. [IMG]http://i97.photobucket.com/albums/l226/perry71/WH800021.jpg[/IMG] bubble bee hive in the silver wards engine. [IMG]http://i97.photobucket.com/albums/l226/perry71/WH800022.jpg[/IMG] john deere patio, new to me gravely, and my retired lgt 145 ford. [IMG]http://i97.photobucket.com/albums/l226/perry71/WH800023.jpg[/IMG] wheel horse C-111 picked up saturday. has a factory installed 11hp briggs. first 70's WH i saw with a side shaft briggs. [IMG]http://i97.photobucket.com/albums/l226/perry71/WH800024.jpg[/IMG] swisher 3 wheel zero turn, old el'toro [IMG]http://i97.photobucket.com/albums/l226/perry71/WH800026.jpg[/IMG] mtd scrap, sears custom frame, david bradley. [IMG]http://i97.photobucket.com/albums/l226/perry71/WH800027.jpg[/IMG] and a never seen before yardman 400. front engine rear steering. anybody have a clue about this one???. [IMG]http://i97.photobucket.com/albums/l226/perry71/WH800028.jpg[/IMG] and my runners. building a fresh kohler right now for the wheel horse next to the sears. [IMG]http://i97.photobucket.com/albums/l226/perry71/WH800012.jpg[/IMG]

Share this post


Link to post
Share on other sites
tracktor312
Hi perry 2 questions 1 that mustang who made it my friend has a tractor that looks just like it but says pinto 5 hp. 2 why is that gravely buried I have one a 816s they are beasts

Share this post


Link to post
Share on other sites
Michiganmobileman
quote:
quote: -------------------------------------------------------------------------------- I said: Honey you think I have a problem come look at this. -------------------------------------------------------------------------------- ditto that
Hey Perry nice collection. Just proved to my wife that i am not the only one too. I dont think its a "problem" though. Its a solution to spare time and we could be doing worse:D. And I gotta ask why you
quote:
my retired lgt 145 ford.
My wife still prefers my LGT 145 over the ACs I have for mowing the lawn. Oh well I still have to keep her anyway after 27 years (wife not LGT). Greg

Share this post


Link to post
Share on other sites
perry
yep them LGT's are sweet tractors. im going to miss that 5ft deck and 48" plow. i installed new bearings & had new spindles machined for the deck. and only used it for 1 cutting season. then the rod siezed on the crank. second motor in this tractor. its been way over worked and i think its finally put to rest:(.
[img]http://i97.photobucket.com/albums/l226/perry71/fordlgt001.jpg[/img]

Share this post


Link to post
Share on other sites
perry
quote:
Originally posted by tracktor312
Hi perry 2 questions 1 that mustang who made it my friend has a tractor that looks just like it but says pinto 5 hp. 2 why is that gravely buried I have one a 816s they are beasts
mustang tractor was made by mowett sales co.inc odessa missouri.
[img]http://i97.photobucket.com/albums/l226/perry71/april14038.jpg[/img]

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • Sam68
    • spi
  • Today's Birthdays

    1. rocks70
      rocks70
      (70 years old)
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 8 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×