Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

Landlord Steering

Recommended Posts

Question: Is the steering on a 7010 the same as a '64 Landlord 990314? The steering is very sloppy on my Landlord, and I have found an assembly from a 7010 I can get, but looking at photos I cannot tell if it is the same.

Share this post

Link to post
Share on other sites
No, nor even directly with the later model foot-draggers -- the 990314 was the last of the tractors that used the round, cast-iron steering gear. To use the steering gear from the Landlord 101 (one year newer), you'd have to also change out the steering shaft... The 990314 would have the same steering gear as a Model 725, for example....

Share this post

Link to post
Share on other sites
It can be done but it's not a quick job. I swapped the gears on my 990314 with the newer style. I swapped out everything from the steering wheel shaft down to the gears. The hardest part was getting the arm off the bottom of the gears (under the tractor.) I ended up using a pickle fork for tie rods to get off. Changing the parts out did make all the difference in the world as far as getting rid of the sloppiness. On mine the big gear's shaft was too badly worn to repair and couldn't find good replacement parts. Kraig

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • Skelsey1989
    • Tom45
    • rich_kildow
  • Today's Birthdays

    1. Briggs
      (53 years old)
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      · 8 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts