joshuaareed 0 Posted June 28, 2007 I have a A/C 314D I acquired and there is a large amount of axle slop in the front axel pivot point. I cannot afford a service manual right now due to the fact I am a sole supporter and have two beautiful children who's needs come before my wants. I was wondering if someone could help me diagnose this problem. I would post a picture , but cannot afford to pay dues yet either. Any help would be greatly appreciated. Thank you in advance for all your help. Share this post Link to post Share on other sites
Unkle Spike 0 Posted June 28, 2007 You need to figure out what are of the front end is worn, You say axle slop? In the wheels, in the bushings the axels turn on, or the actual steering? Start with what and where you are seeing it, and someone will be glad to help.sm01 Share this post Link to post Share on other sites
joshuaareed 0 Posted June 28, 2007 It is where the entire front end connects to the tractor's frame with one bolt I guesse it would be the axle beam , sorry about that I knew what I ment but did not put it in words Share this post Link to post Share on other sites
joshuaareed 0 Posted June 28, 2007 It apears it is at the pivot point for the axle asy. the bearing sleeve may need to be replaced. Thanks to all for your help. and thanks to Gregc for the tech pubs link. Share this post Link to post Share on other sites