ehertzfeld 1 Posted July 5, 2007 This is my "ebucket" I made a few years back. I'm going to try to put in measurements to some of the pictures, so check back from time to time to see if I figures out how. But this should give you some idea of how you want to make one for your self. Share this post Link to post Share on other sites
Roy 0 Posted July 5, 2007 Elon, Yes, your pictures are helpful. Looking forward to whatever dimensions you can provide. Thanks, Share this post Link to post Share on other sites
ehertzfeld 1 Posted July 5, 2007 Ok I figured it out, if you need more, just tell me what picture and the parts you need measurements for. Share this post Link to post Share on other sites
haykarenhardy 6 Posted July 6, 2007 Looks like you went from a solid lift arm in an earlier photo to a spring type like a snow blade. Was this to lessen the shock to the tractor when loading and transport? I made my bucket 42" wide, but was not sure how I wanted to hook up to the tractor. One post offered an idea to give the lift arm more travel, to increase lift height. It was a simple extension bolted to the tractor lift arm. Thank You Stan Share this post Link to post Share on other sites
skunkhome 0 Posted July 6, 2007 Elon, That is a very nice looking rig. I think I need to take up welding. Share this post Link to post Share on other sites