Lift Arm ?

[Bunky 3]

Well with the Advice of HubbardRa and others I bent me a nev gov. rod and got the wards running today.. Seems to work good other then a couple of Carb adjustments.. No I have another problem I think the spring is weak in the lift arm button it won't hold in the grooves. Is it best to Buy the Simplicity spring or just use a Hardware store one??

[ehertzfeld 1]

It may not be the spring itself. If the tab, "the part that goes into the grove" is worn that will do it too. I had one that wouldn't hold up anything for long. I tried a new spring, and even two springs, and it got a bit better, but the first bump and the plow was down!:O:( I swapped lift handles and the problem went away.

[HubbardRA 12]

Try taking a file and squaring up the worn rod and squaring up the slots. This may help.

[Roy 0]

I weld up the worn spot and file it square. Have done this on my B-1, 725, and 7013S. Works great. :)

[Bunky 3]

Does some one have a lift arm torn apart? In the parts diagram it shows a spacer under the spring... I don't see one in mine.. I don't know how to post PDF pages so I can't show the picture

[gregc 3]

Here's the pic. Spacer is AG.

[Bunky 3]

Thanks Greg Does anyone know how tall the spacer (AG) is ???