ringram Posted July 23, 2007 Posted July 23, 2007 Has anyone tried bench testing/calibrating one of these three pole regulators? I've been tinkering around with mine to try and get it calibrated properly, and was hoping to get some feedback.
John_RI Posted July 23, 2007 Posted July 23, 2007 Don't know if this will be of help but Al Eden put together a nice series on Electrical Systems listed under the Service link at SimpletrACtors.com. Included is a section on the 3 pole regulator: http://www.simpletractors.com/service/electrics/3_pole_regulators.htm John
ringram Posted July 23, 2007 Author Posted July 23, 2007 ya, i read that already. That article is what got me tinkering around with the regulator in the first place. I was hoping somebody already went through a calibration on one of these units. I'm sure I'll figure something out.
Recommended Posts