FiremanRon 0 Posted August 14, 2007 Does anyone have a wiring diagram for a Legacy XL diesel? I mowed with mine yesterday and now I can't get it to start. Everything seems to be okay except that after the glow plug times out, I turn the key to "start", nothing happens. No clicks, hums, or trying to crank, just silence. I have checked all the safety switches, they are properly adjusted and making contact. The battery is good. The ignition switch is good. I haven't found any broken wires, but if I had a diagram, I could trace them out. Share this post Link to post Share on other sites
UCD 14 Posted August 14, 2007 Sorry it is so large but it is as small as I could get it and still make out the details. It is a large diagram. Share this post Link to post Share on other sites
FiremanRon 0 Posted August 14, 2007 Thanks, I really appreciate it. I can work off a diagram, but when everything is hidden inside the tractor frame, it's pretty hard to trace out circuits. Share this post Link to post Share on other sites
FiremanRon 0 Posted August 14, 2007 Thanks to your drawing, I was able to isolate the prolem to the RMO switch. To keep people from just unplugging the RMO switch, they run the start circuit through it. I found the plug had come out of the circuit board. Not the plug on the wiring harness, but the plug on the back of the switch that is(was) soldered to the circuit board. Five minutes with a soldering iron and I'm back in business. Thanks again!!! Share this post Link to post Share on other sites