mech1 0 Posted August 18, 2007 Power Max 60" mower deck and the interior belt slips off the ideler pulley. Why is that? Share this post Link to post Share on other sites
wilm169 1 Posted August 18, 2007 WELCOME: there can be a few differant reasons, 1 a bearing problem in the idler, 2 the spring not holding enough, 3 possible spindel bearings, 4 pulleys cracked wobbling, 5 bolt loose in deck that holds the idler, 6 did you or someone bend the deck it self? might be others but a few to start off with. Share this post Link to post Share on other sites
D-17_Dave 12 Posted August 19, 2007 What Levi said. Also check to see that the mount for the idler is holding the idler pulley straight in alignment with the belt. If you have a severly worn spindle bearings the slindle shafts may be flopping around causing the belt to occilate up and down and jump off. These bearings being small roller type they may run smooth but still allow side to side movement of the spindle. If this movement is anything noticable they need changing. Share this post Link to post Share on other sites