MPH Posted September 1, 2007 Posted September 1, 2007 For your time and troubles to post the dimensions for making a swathboard. Didn't have to make the mounting bracket as I had that but all else worked out perfect. Did a quickie on the divider rod and just flattened a piece of 1/2 inch conduit as I was hoping to use it tonight before it rained, I lostC
Roy Posted September 2, 2007 Posted September 2, 2007 Marty, Glad it worked for you. Good thinking on the divider rod. ^ I made the drawing from a tracing another member sent me. Would thank him also but cannot remember who it was (bad case of CRS). :(
Vinnie_A Posted September 4, 2007 Posted September 4, 2007 Marty or Roy, Were there actually dimensions posted on the site for making this? If not could you post the dimensions so I could give this a try also. Thanks, Vinnie
Roy Posted September 4, 2007 Posted September 4, 2007 Vinnie, Yup. The drawings are here at the link below: "http://www.simpletractors.com/do_it/sicklebar_swathboard.htm"
Recommended Posts