Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
ZippoVarga

Cornfused!! Yes, I said Corn..fused.

Recommended Posts

ZippoVarga
Ok...Here we have two identical 64 LL's with this one exception. What's up with the extra pulley from the BGB drive pulley on the second picture? I'm not a dunce. I know it's for some implement. But...We have a front PTO, a mid PTO and a rear PTO. This one's between the mid and rear....or is this the elusive rear PTO every one keeps wanting? And no....I will not take it off and ship it to you for a closer inspection...lol. As can be seen...this pulley stays live weather the cluch is depressed or engaged.




Another thing......one of the LL's has a blank serial number tag. I don't mean it's been rubbed clean. I mean there were never any numbers stamped into the space provided on the decal. IF there were I would be able to see the impression to some degree weather it was rubbed clean or not. Any help?? The LL WITH OUT the serial number, which is the one with out the extra pulley, also still has the pattent fabric tape like sticker firmly afixed just in front of the black and chrome type decal with the model and serial number tag. This indicates to me that this LL, along with many other well preserved parts, is a time capsule of sorts. Meaning it's all original and everything is VERY tight. Like from the factory bought new now tight. I can get pics if any one thinks it will help.

Share this post


Link to post
Share on other sites
4xbill
Zippo, I asked the same question recently about my 2012. See http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=85095 It is a right side pulley to run a leaf vac or the 1500w generator.

Share this post


Link to post
Share on other sites
ZippoVarga
Peter...Not sure about the man sleeping on the job when this one came through the line...lol. Thanks Bill. I hadnt been able to compare it to another so it never dawned on me untill this other 64 LL showed up. Sean

Share this post


Link to post
Share on other sites
ZippoVarga
Something else about that new LL that surprised me a little. Although it has a terrible attempt at a re-paint, the gas tank still has the decal on it. Of the 6 60's vintage Simplicities i've had the pleasure of owning, this one is the only one with that decal, not to mention the only one i've seen. After I finish the Sovereign, since there's now a spare LL, I'm going to restore the new to me LL. Yep...I've got the bug now. I just never imagined the results would out weigh the need to keep them in service. Well...enough rambling. Stay tuned to the Sovereigns updates. I wont meet my goal of getting it done in a month, but it will be a show stopper I hope.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • Tcorm
    • Skelsey1989
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 8 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×