MarksA-C Posted September 9, 2007 Posted September 9, 2007 Simpletom Stoped by and helped me out with my 707. Took it apart, points were dirty...Cleaned at put it all back together. Test started it and it ran rough for a few seconds and died. Couldn't re-start it. 8C Took it apart again, cleaned up the points better...and also found that the flywheel key was sheered. XX( Replaced that and put it all back together. 1 pull and a little starter fluid. Ran better that I thought it would. :) Once again, thank you Tom. Stay tooned for a part 3 coming very soon!!
Recommended Posts