Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
GWGAllisfan

hydro filter

Recommended Posts

RayS
If you have the remote filter in between the BGB and transmission you need NAPA filter 21068. If it is the short filter on the side of the pump I have a NAPA gold series number 1335 on mine.

Share this post


Link to post
Share on other sites
dirtsaver
Randy I'll sidewith Matt on that. Maynard and other of the old pros here can explain it better but aftermarket filters tend to cause problems on hydros. Something about causing flow or pressure problems.

Share this post


Link to post
Share on other sites
B.Ikard
Good points on the OEM filter- The problem down here(Georgia) is there is no dealer to buy one from. I have Stens filters on a couple tractors-no problems with mine. Biggest reason I have that brand is I get Stens parts at cost. I also use ATF with no negative effects. Your mileage may vary however:) Brent

Share this post


Link to post
Share on other sites
RayS
I use Napa and Wix on mine and never had problems with them. Baldwin makes good filters as well. The problem filter that people have had problems with on here is Fram filters. In my opinion Fram is the worst filter for anything. I bet Simplicity never built a filter just had them made to there specifications. Here is a interesting link to a oil filter study. http://minimopar.knizefamily.net/oilfilters.html

Share this post


Link to post
Share on other sites
goatfarmer
In a pinch a few years ago, on a Sunday afternoon, I found out an older model Ford oil filter will fit. I used a Purolator PER1A. It's still on there, not had any problems.

Share this post


Link to post
Share on other sites
ghwrenchit
quote:
Originally posted by RayS
... The problem filter that people have had problems with on here is Fram filters. In my opinion Fram is the worst filter for anything...
Ditto that, If the threads are right, gasket close, and physical size works, they will toss it into the application guide regardless of the OEM specs for media flow, anti-drain-back valve, pressure release etc... Greg PS WIX is good stuff, if they don't cross it there is a reason.;)

Share this post


Link to post
Share on other sites
GWGAllisfan
I'd get the Simplicity filter, but as brent said, in this part of the country, knowing the Aftermarket equivalents is vital, since the stocking simplicity dealers are few and far between. I bought the NAPA 1335. Now if I can just get the enthusiasm to actually cahnge the fluid.....

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • rokon2813
    • smalljob
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 8 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×