Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
ghwrenchit

Large Frame Tiller Attached - Picture Request

Recommended Posts

ghwrenchit
If any of you Gent's could chime in if you are able to take a few detailed pictures of your tiller attached, side pulley's, and upper hitch I would appreciate it. I've been looking at the parts diagram's (7117) and am scratching my head a little. I received a free "basket case" 36" tiller, and I think I will need to fab up some missing pulley brackets, and the upper hitch lift arm. Thanks Greg (Just another excuse to weld...):D

Share this post


Link to post
Share on other sites
ghwrenchit
Stan, Yes, that does help. Looks like I'm missing the proper lift arm... the "post" piece on the tractor if you will. Also, does the tiller use the cable lift, or a rod on a hydro? Thanks Greg

Share this post


Link to post
Share on other sites
UCD
the 3200 series and down and the B series used a one piece ROD for the rear lift. The 3300 series used a two piece slip joint ROD for the rear lift.The 3300 parts manuals do not show this two piece rod. The 3400, 7000, 7100, series and 700, 900 series Allis Chalmeres used a cable for the rear lift. 3300 series rear lift rod.


Typical rear lift cable used on 3400, 7000, 7100, 700, 900, series.

Share this post


Link to post
Share on other sites
ghwrenchit
Thanks guys, I'll try to source some of these parts before I try to fabricate something. Already have a cut up dog tie out for my lift cable now sm01, and "Skippy" (Lab/Boston Terrier Mix) seems to like his new one. It was only the few hour span a few saturdays ago that I did'nt let him out that got him upset.:D:D Greg

Share this post


Link to post
Share on other sites
gregc
It would seem that the 3200 series tractors could have used either the one piece lift rod (included in MFG #990622 rear lift kit) or the two piece slip joint lift rod (included in MFG #990642 rear lift kit) for the rear lift since both are listed in most of the parts lists for those tractors. http://www.simplicitytechpubs.com/6767PRINT/PDF_files/TP_100_3678_00_LL_S.pdf http://www.simplicitytechpubs.com/6767PRINT/PDF_files/TP_400_1321_00_SV_S.pdf http://www.simplicitytechpubs.com/6767PRINT/PDF_files/TP_400_1320_00_SV_S.pdf The Operator's manual for the 3300 series tractors lists MFG #990690 rear lift kit as an accessory. I don't have a parts list for that kit, but I feel sure that it contains the two piece slip joint lift rod also. Does anyone here have a parts list for the MFG #990690 Rear Lift Kit that they would share?

Share this post


Link to post
Share on other sites
ghwrenchit
Thanks guys, Looks like the main thing I need in the diagram above is item S, "Lift Lever Bracket". The reason I was scratching my hear is because in the parts diagram view, you only see the left side and not the "Tube" for tiller reciever on the right side of the bracket. I'll post a parts wanted add. (found it at Jack's...$86.00 new sm02) Thanks again, the info helped a ton. Greg

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • Greatwest
  • Today's Birthdays

    1. AC1945WC
      AC1945WC
      (39 years old)
    2. popcorn
      popcorn
      (49 years old)
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 8 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×