SharkyEd 0 Posted December 2, 2007 Can anyone tell me how the snowblower hooks up on a 7116 Simplicity. Does it run off the center PTO or on the front of motor? I need the belt size and routing diagram. I would be thankful for any info on this. The tractor is a 7116H and has been repowered to a M-18 Kohler with hydro-drive and lift. Thanks! Share this post Link to post Share on other sites
UCD 14 Posted December 2, 2007 It runs off from the center PTO 1690547 36" Snowthrower Drive Belt# 1666798 Length 147.1" Type HA 1690548 42" Snowthrower Drive Belt# 1666798 Length 147.1" Type HA Share this post Link to post Share on other sites
SharkyEd 0 Posted December 2, 2007 Thanks a lot Maynard, I will get a chance to try this out real soon as they are calling for snow this coming week in South Bend,Indiana. Thanks again. You and your family have a Merry Christmas and a happy new year!!! SharkyEd Share this post Link to post Share on other sites
qtown7116H 0 Posted December 3, 2007 Don't forget to move the idler pulley to the outer tab on the frame!! Share this post Link to post Share on other sites
UCD 14 Posted December 3, 2007 Front Idler pulley A goes in the lower tab of the idler bracket E For the snow blower upper tab for the mower. Rear idler pulley D is adjustable to tension belt. Share this post Link to post Share on other sites