MarksA-C 93 Posted December 13, 2007 Well, so far winters been ok but I'm close to getting a hitch for the snowblower I got for my 6518. With the snowblower I hope to get my cab to fit until I can finish the AC610 which the cab goes to. I would have to make a new set of front mounts that can either attach to the hood or can attach to the running boards and a simple set in the back to get the proper hight. The only problem I can see is the lift arm being too far out to the side and hitting the cab. I'll have to see wen I dig out my can and put it together. This picture is of the cab from last winter. Share this post Link to post Share on other sites
cojo92 1 Posted December 14, 2007 KOOL!!!!!!!!!!...lol Share this post Link to post Share on other sites
Ted R. Williams 0 Posted January 3, 2008 If you build your own cab you can make it all fit. The do it yourself snout-motor is quick,easy and cheap.I attached my cab to the running boards and the back hitch plate.By doing your own you can put the lift handle inside also.All of this was pretty simple and cost under $250. Hope this helps you out!! Share this post Link to post Share on other sites