Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
forart

700 wonderboy plus..,

Recommended Posts

forart


this 700 wonderboy was part of a multi-item deal, but was essentially a freebie. obviously it needs some parts (hood, front spindles, choke cable,etc.) but is solid, no rust, just lots of layers of paint. i feel amazingly fortunate to acquire this, as these are extremely rare here in the mountain west. the deal was the 700 wonderboy with rear wheel weights, an intact 3410s landlord with chains, needing a carb rebuild, two good snow/dozer blades with hitches and a simplicity moldboard plow minus the coulter blade, but in pristine condition otherwise. $300

Share this post


Link to post
Share on other sites
MPH
Welcome to the club William, nice to have another member west of the Miss. River^. Nice score on the tractors, esp the 700 as it's a FDT ^. It actually is not missing the choke cable, that wasn't added til the late 725 in '62-63. Should be able to come up with a hood from someone here.

Share this post


Link to post
Share on other sites
mooseman3210
Greeting's for Upstate New York and welcome to the club you love it here . There is always someone who can help with what ever you may need . good luck putting her back together .

Share this post


Link to post
Share on other sites
forart
thanks for all the welcomes!!! i have been lurking here for months gaining info and soaking up pointers. so far my fleet consists of: 5212.5g......has rebuilt engine, great mower deck, new carb, new paint, transaxle rebuild in progress. 700 wonderboy....needs new paint, hood, front spindles (wobbly), seat. 3410s......needs carb rebuild, paint in the future. two snow/dozer blades (good condition, need paint. simplicity mouldboard plow, almost pristine, needs coulter blade. we have purchased a ranch (14.5 acres) in Idaho and need some sturdy equipment. simplicitys in this part of the world are few and far between and consequently it has taken me months to find any at all, but the ones i have acquired so far should consume my attention for quite a while. thanks again, forart

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    There are no registered users currently online

  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 8 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×