MPH 12 Posted December 30, 2007 After a couple boring hours of making 20 of the bolts on the right look like the one on the left, for the harrow spike holding clamps, I took the LL out to drag down 3 or 4 inches of snow that has added up on my walking trail. Second time around the thrill of running through the woods at WOT with a model 23 Briggs hit me, almost as enjoyable as the sounds of silence I enjoy walking it daily, so I grabbed the camera and made one more round:D With the piece of 1 inch shaker screen, my burn barrel cover;), full of snow the governor would actually open up pulling up the slight hill on the north side of the trail, then the Firestones would start digging One must always remember that cowboy song that states " there's no such thing as Tooo much fun" ^^ Share this post Link to post Share on other sites
Willy 2 Posted December 30, 2007 Looks like a make play day.:D:D I can about guess what your grinder wheel looks like after a20 bolt rebuild. Share this post Link to post Share on other sites
ZippoVarga 61 Posted December 31, 2007 Just picked up my third 23D powered machine a short while back. A rough early B-1. Love those engines and round hoods the best. Share this post Link to post Share on other sites
ehertzfeld 1 Posted December 31, 2007 Sean, a B1 should have a model 19 not a 23d, unless some one swapped it. Share this post Link to post Share on other sites