Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

Executive decision

Recommended Posts

after lengthy planning and decision making process the board of Dad and son made a powerful decision that the 416 that we have been restoring will now become a 410 the decision was made after determining that since the 416 that we are restoring will not be doing a whole lot of work and that since i had put the 16 horse in my 410 to get through the winter & spent a very long time rebuilding the motor that came out of my 410 after i blew it up . we have a completely new machine from top to bottom . all we will have to do is get decals that say 410 and that will be that . we would love to here any and all comments that you all might have on this matter . thank you David M Yarnes AKA President David Yarnes Vice President Here are a couple of pics from the engine rebuild . also stay tuned tomorrow as we will be getting most of the tractor together

Share this post

Link to post
Share on other sites
So, you put the 16 in the 410, and are putting the 10 in the 416? I see no reason not to since the 16 is already installed and working, no reason to have both apart! Sound thinking to me, carry on.^

Share this post

Link to post
Share on other sites
Believe me I can understand about those EXECUTIVE DECISIONS. Seems they mostly just get in the way of some good tractor time.:o) Looks good so far, can't wait to see it done. Looks like we have several 300 and 400 series tractors getting some sprucing up here lately. Very nice work everyone.

Share this post

Link to post
Share on other sites
Yep D-17 Dave the board room was filled to capacity all of the members were there My Dad Me the 410 416 the broad more my son Brandon Gunner and my Daughter Jordan we finished the meeting with a little wrench turning and some painting . I will say the company is one of the best i ever worked for but the pay is horrible it seems like i have to pay to work here LOL :D:D:D but we do work on some important stuff i even feel we might be saving life's

Share this post

Link to post
Share on other sites
Hey Dave are you hiring. LOL!!! I sure would love to loose the stressful job and turn wrenches on these tractors for a living. Unfortunately I don't think I could cover the bills with the pay. Looking good, by the way I had a suspicion that that was going to happen any way. The 16hp in the 410 for ever.

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • MARK (LI)
    • bowhunt4life
    • Baja24
    • victorsnc
    • BruceH
  • Today's Birthdays

    1. Andust
    2. Noly
      (69 years old)
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      · 8 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts