Hydraulics for briggs 16hp for a Loader

[B_WALLY_]

Northern Tool and Hydraulics has all kinds of Hydraulic pumps etc., There tel.# is 1-800-533-5545. You will need to know some specs. to choose what pump to use such as GPM or gallons per minute also whether you would want a single stage pump or two stage. The two stage are quicker. You can also check out CAD plans at 540-992-4758 or www.cadplans.com. They sell plans (little expensive ) but might steer you in the right direction. Also check out the factory manual for loader for your machine for specs.[A href='www.cadplans.com']www.cadplans.com[/a]

[Gabe]

thanks for the info,they never made a loader for my 7116-6, but if there's a will there's a way. i was just hopeing someone on here has built one. thanks again.

[Guest]

what i have is a 7116-6 with a front shaft on the 16hp motor, some tractor nut friends of mine, (including myself) are thinking of building a front end loader for it. and i would like it to be done the right way. and you friends on this site are the BEST, what need is help in finding a hydraulic pump that would work on this, and any other ideas or suggestions on anything to do with this loader prodject. Thank-You Lloyd,