Wheel spacers for L-10 Loader

[Charlie 0]

Could some one tell me what the flange to flange distance is on the wheel spacers that are to be used with a L-10 loader. The bucket is 42" and with the outside tire to tire distance at 36" (8" tires) they should probably be no more than 2"-3". I need to find a set or fabricate them. Thanks Greg

[B_WALLY_ 0]

Kent, I think you would have more luck waving that fresh crisp $20 and $5 in his face. Be sure to take your trailer along.

[tej 1]

Greg, I just measured the ones on my tractor and they are 3 1/4 end to end out side measurement. Tim

[Kent 435]

Greg, The solution is to sell me the L-10 for about $25 or so, and then you won't need to worry about the wheel spacers... Just trying to help! 8o) Kent

[BEB 0]

Thanks for the info on the spacers Tim. As for the other suggestions, I have hauled this loader from 3 different houses over 10 years. Now that I have the right tractor for it I will see the project thru.