Scoop 0 Posted April 4, 2001 Unit has beenchanged over to 12 volt system. Has no spark to plug but has spark at points, has new coil,condenser. Cleaned flywheeleand found old coil not hooked up. Does this have to be hooked up? Need some advice on this. thank-you SCOOP from TR Mi. Share this post Link to post Share on other sites
Scoop 0 Posted April 5, 2001 Thanks I will try the changes tonight and get back with you.Scoop Share this post Link to post Share on other sites
dlcentral 1 Posted April 5, 2001 Batt. ign. sys must be SEPARATE from the old mag sys.is all that disconeccted? esp. from points?Are you using a Kohler coil and Kohler condenser?I've found that SOME car coils won't work right,or not at all, Is the coil hooked up right?pos. + to batt/// neg.- to points? Share this post Link to post Share on other sites
SmilinSam 3,585 Posted April 5, 2001 A bad Plug has been the cause for me many a time, but you have probably already tried a new one. I have had bad lead wires to the plug before too, And dont use graphite wire, use copper wire. Smilin'Sam Share this post Link to post Share on other sites