Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Need advice on my tractor


73simplicity

Recommended Posts

I'm suspicious that you might have a drive belt that is slipping on the down hill and letting the tractor overrun the engine. Before you go after the engine try a heavier or extra spring on the clutch idler.
Link to comment
Share on other sites

I agree with Carter. I had to replace my drive belt with a QUALITY belt to stop coasting down hills on my B-10. The old belt was tight, but the wear surface was really smooth and shiny.
Link to comment
Share on other sites

I have a 73 Simplicity 3416 s Soveriegn and the engine runs good and cranks good but it has trouble holding back going down a slope which means poor compression but I just recently installed new rings and a piston myself. I think it needs valves and valve seats. I'm just learning the ropes of a small engine mechanic and I need advice on installing valves and valve seats. I already understand how to remove the old valves by removing the crankcase breather and using a spring compresser on the valve springs and removing the valve pins. But I just don't understand the details of removing the old seats and installing the new ones. Please give me a thorough explanation. Thank You
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...