big ten mower belt

[Guest]

how is the belt run on the pto's and which pto do you use for the mower deck. and does the belt have a twist in it when it is routed the right way? Please any help..... thanks scott

[Erich_Siewert]

The belt should have a twist in it. There should be an arrow on the mower deck unless it was painted over. the belt should twist so the lower part of the belt is on the left side and the upper is on the right. the belt goes on the larger drive shaft pulley. then you can tighten up the spring and it should work. ERICH http://www.simpletractors.com/images/mower1_ops/figure3.jpg

[MPH]

Erich, thanks for the photo of the lift arm, been lookin at that set up on my b112, still doesn't look like it could work but I guess it does MPH