debshirl Posted February 12, 2009 Posted February 12, 2009 have a 2110 with a 8 inch pully on trans having trouble getting correct drive belt rays gave me number 152017 ordered one that is a standard belt and is to short also said belt was 49 in long tried a 49 in belt from work way to long can any one help me with this? were can i look up correct belt?
wilm169 Posted February 12, 2009 Posted February 12, 2009 Sounds as if some one has changed the rear pully, they offered 3 differant ones, a 6" an 8" and a 10", belt length will depend upon what you have.
UCD Posted February 12, 2009 Posted February 12, 2009 The belt book lists 174486 48.9" type HB for low speed pulley but doesn't specify pulley size.
DMedal Posted February 12, 2009 Posted February 12, 2009 Paul, maybe a good time to figure out what size pulley you want. before I got a hi/lo I converted to 10" pulley and a 49" belt and found it way better for tilling and cultivating. If you want top end speed it is clearly NOT the way to go. -Don
debshirl Posted February 12, 2009 Author Posted February 12, 2009 would like to stay with 8 inch pulley if possible this is going to be a blade machine and to also slow tractor down for grandkids
Recommended Posts